23 used & new from Ships from and sold by VirVentures. SPT WA-1222S 12,000BTU Window Air Conditioner - Energy Star 20.9 x 19.7 x 14.8 inches 86 pounds (View shipping rates and policies) #101,781 in Home and Kitchen (See Top 100 in Home and Kitchen) #38 in Home & Kitchen > Heating, Cooling & Air Quality > Air Conditioners & Accessories > Air Conditioners > Window Frigidaire FFRA1222R1 12000 BTU 115-volt Window-Mounted Compact Air Conditioner with Remote Control Frigidaire 12,000 BTU 115V Window-Mounted Compact Air Conditioner with Temperature Sensing Remote Control See all 160 customer reviews See all 160 customer reviews (newest first) This air conditioner is very noisy, but then I've yet to find one that is whisper-quiet. Otherwise the unit is very effective and all functions worked as advertised. Some people say it's slightly loud on hi. OK....... so what fan isn't? The thing works great. Pumps out 50 degree air at a pretty good volume.

Cools a large space quickly. Even better than my last Sunpentown air conditioner. I loved that old model one, but I gave it to the lady next door because she didn't have one. Excellent AC have no issue with it, keeps the place cool and my electric bill went down.Does what it's suppose to... Love this air conditioner. Everything is great except for 1 little thing & that is that the drain hole under it is way to small. It's constantly getting clogged. Love this AC Unit. I would DIE without it. At any rate, I love that this is self regulated. Set the temp and it will run as needed. It does get kind of loud! So far I have this ac unit for two summers and it has worked out great, a bit loud but that's the only "problem" so far, good pricing too.It cools my large living room very nicely! It is high quality! Good quality for the price. As other reviews have mentioned this air conditioner is kinda noisy, but does a great job of cooling down the room. Don't think it cools as well as a 12,000 BTU unit should.

Other than that, it seems comparable to other units noise-wise and air-flow-wise. See and discover other items: room cooler, timer thermostat, remote controlled fan There is a difference between my calculations and what electricians say. air conditioning unit not putting out cold airAm I missing something?hvac condenser unit cost If I need to install a 3 horsepower air conditioner. home ac unit won't turn offElectricians always choose wires that are more than 4 sq mm. They say that air conditioners consume high current. My calculations tell me that I can use 1.5 sq mm only. 3 horsepower = 2237.1 watt I = Power / voltage = 2237.1 / 220 = 10.16 Amps According to the following table, I will choose 1.5 sq mm.

So, Why does electricians choose that thick cables? current temperature wire maximum-ratings wire-size You do not indicate so I wonder if you have considered the cable run length. Why would you like a thinner cable, if it is to save cost then the length is likely subtantial and therefore more of a reason to use thicker conductors. Also the electricians are aware that compressor devices have very large inrush currents that are supported by thicker cables. I found this mentioned in an Off grid guide by JayCar. Australian Standard AS4509.2 states a surge factor of 7x the continuous power should be used for electric motors, water pumps, fridges, air conditioner, and washing machines. A surge factor of 3x should be used for kitchen appliances and other electronics equipment, and surge factor of 1x for resistive loads. Another more interesting document on Cold Load Pickup Issues also shows similar inrush current figures. Similar tests were conducted with on a ¼ HP refrigerator motor.

The test results showed an average inrush current of 15 amperes and a maximum of 18 amperes. The average inrush was 7.5 times the steady state run current of 2 amperes. It took 483 milliseconds to reach the steady state condition. The test after a 25 cycle interruption produced lower inrush current and shorter times to reach steady state, 6 – 17 amperes and with 217 milliseconds to reach steady state. Also tested was a 3 ton air conditioner. The momentary interruption test and the cold load pickup test showed an average inrush current of 90 amperes which lasted for 117 milliseconds. The inrush current was 7.26 times the steady state run current of 12.4 amperes. The steady state value was reached in 267 milliseconds.Browse other questions tagged current temperature wire maximum-ratings wire-size or ask your own question.The requested URL /index.php?page=proddet&brand=24 was not found on this server.One commonly unknown type of permit is the “Equipment Use Permit”. A permit to operate an Air Conditioning and Ventilating Equipment requires an “Equipment Use Permit” prior to operation of the machinery.

Most but not all air conditioning systems require this type of permit. The New York City Building Code exempts only the following: 27-184 (26-116.5) EXEMPTIONS FROM PERMIT REQUIREMENT. An equipment work permit shall not be required in any of the following cases: (a) Air-Conditioning and Ventilating Systems – Where the system is a voluntary system serving only one floor of a building and: (1) Does not use lot line windows for the intake or exhaust of air or the mounting of equipment. (2) Is not installed in any public hallway, passageway, or stairway. (3) Does not in any way reduce the ventilation of any room or space below that required by code provisions. (4) Does not penetrate any fire division, roof, floor, or wall (except that a packaged air-conditioning unit not exceeding 3 tons rated capacity may be used in windows or in sleeves under windows, provided that health, fire and/or structural safety is not thereby impaired). Simply stated, any package system under 3 tons which fits in a window or in a wall sleeve is exempt.

A split system which is on a roof, or penetrates any fire division, roof, or wall, does require an Equipment Use Permit. After plans are approved for the installation of and air conditioning system, a permit is obtained by the contractor and the equipment is installed. After installation is complete, an application for an Equipment Use Permit is made by the registered professional. A controlled inspection is filed. The requirements for inspection are as follows: 27-187 (26-117.3) INSPECTIONS AND TESTS. No equipment use permit shall be issued unless and until the equipment shall have been inspected and tested to determine proper functioning and compliance with the provisions of this code and other applicable laws and regulations. All inspections and tests shall be conducted in accordance with required inspection and test procedures; and signed copies of all required inspection and test reports shall be filed with the department and form part of the papers accompanying the permit application.