Energy saving and environmental protection as standard. HomeCompanyProductsServiceDownloadsSupplier portalWolf ErP PortalReferences Products Single- / multi-family house Control equipment Bus interface ISM8 KNX network Integration into complete building systems Intelligent building systems are now used to reduce running costs and to make usage more flexible and safe. The KNX bus technology brings significant benefits, including sophisticated control options, the interaction of sensors and consumption devices, as well as the acquisition of consumption data (smart metering).The Wolf KNX interface kit makes it possible to integrate Wolf system components into the KNX building automation system. In this way, all gas and oil condensing boilers with BlueStream® (CGB-2, CGS-2, CGW-2, CSZ-2, MGK-2, TOB), plus the BWL-1S split air source heat pump, can be integrated. It is also possible to integrate additional components such as the MM mixer module, the KM cascade module, the SM1/SM2 solar collectors, and the mechanical air handling unit from the CWL Excellent series.

If a CWL Excellent is used in standalone mode (without heating equipment), the corresponding external KNX interface set is available in the shape of the ISM8e.In conjunction with the BM-2 programming unit, data points can be read and written via the KNX network. Actual values and statuses from the respective control units are collected in the ISM8 interface module and made available via the KNX/IP module. central ac units calgaryOther appliances in the KNX system can read and write these network variables.best quiet ac window unitThe ISM8 can also be used without the BAOS module as an ebus/Ethernet interface (ISM8i – ebus/Ethernet interface set).refrigerant for home ac unitsMultizone DOPAIR - Mobile unit for air decontamination Filtration (pre-filter + HEPA + carbon filter)

Destruction of microorganisms thanks to plasma reactor Air flow speed up to 800m3/h Control panel to adjust air flow speed and display of alarms Low sound level: 48 dB(A) at 530 m3/h In ISO 7, Multizone DOPAIR®can decontaminate efficiently a room of 11 m2 (ceiling height 3m). In ISO 8, Multizone DOPAIR® can decontaminate efficiently a room of 18 m2 ceiling height 3m). “Plug & Play” solution to be installed installation inside the concerned area. Examples of areas of application: ICUs, isolation rooms, gynecology and obstetrics, OPD, hematology, chemotherapy, angiography, resuscitation rooms, plastic surgery, etc. Room DOPAIR - Mobile unit for air decontamination Filtration (pre-filter + F7 + HEPA H14) Destruction of microorganisms thanks to photocatalysis technology Air flow speed up to 1200m3/h Touch screen multifunctions control panel (information on air quality, traceability, etc.) Extremely low sound level: 42 dB(A) at 800 m3/h

Optional : Remote control touch pad Option : Fresh air kit In ISO 7, Room DOPAIR®can decontaminate efficiently a room of 16 m2 (ceiling height 3m). In ISO 8, Room DOPAIR® can decontaminate efficiently a room of 27 m2 (ceiling height 3m). Examples of areas of application: Operating rooms, oncology pediatrics, ICUs, isolation rooms, gynecology and obstetrics, OPD, hematology, chemotherapy, angiography, resuscitation rooms, plastic surgery, burn wards etc. DOPAIR - Mobile unit for air decontamination Filtration (F7 + HEPA H14) Destruction of microorganisms thanks to Bioxigen® Air flow speed up to 2000m3/h Control panel to adjust air flow speed and alarms display Very low sound level: 47 dB(A) at 1200 m3/h Option fresh air kit In ISO 7, Room DOPAIR® can decontaminate efficiently a room of 27 m2 (ceiling height 3m). In ISO 8, Room DOPAIR®® can decontaminate efficiently a room of 44 m2 (ceiling height 3m). CLINICAIR 1B - Compact and hygienic air handling unit

Air renewal and air decontamination (filtration) Pressure in the room Air flow speed up to 2500 m3/h. Pressure up to 100 Pa Cooling system: direct expansion. Three configurations of Clinicair 1B exist : With an air intake grille on the front panel and a plenum for air supply, the unit will be installed inside the room to be treated (for a room classification up to ISO 7) With an air intake grille on the front panel and without plenum for air supply, the unit will be linked to a laminar air flow ceiling for air supply  (for a room classification up to ISO 5) Without an air intake grille on the front panel and without plenum for air supply, the unit will be linked to a laminar air flow ceiling for air supply  and to air intake grilles positioned in the corners of the room (for a room classification up to ISO 5). In ISO 8, Clinicair 1B can decontaminate efficiently a room of 56 m2 (ceiling height 3m). In ISO 7, Clinicair 1B can decontaminate efficiently a room of 33 m2 (ceiling height 3m).

In ISO 5, Clinicair 1B can decontaminate efficiently a room of 17 m2 (ceiling height 3m). Clinicair 1B can be installed inside or at the nearest to the concerned area. CLINICAIR 3 - Compact and hygienic air handling unit Air flow speed from 1000 to 20000 m3/h. Pressure up to 1500 Pa Cooling system: direct expansion or chilled water In ISO 8, Clinicair 3 can decontaminate efficiently a room up to 444 m2 (ceiling height 3m). In ISO 7, Clinicair 3 can decontaminate efficiently a room up to 267 m2 (ceiling height 3m). In ISO 5, Clinicair 3 can decontaminate efficiently a room up to 133 m2 (ceiling height 3m). Clinicair 3 can be installed at the nearest to the concerned area. CLINICAIR 4 - Compact and hygienic air handling unit Air flow speed from 3000 to 8000 m3/h. Pressure up to 500 Pa Cooling system: direct expansion or chilled water. In ISO 8, Clinicair 4 can decontaminate efficiently a room of 178 m2 (ceiling height 3m).

In ISO 7, Clinicair 4 can decontaminate efficiently a room of 107 m2 (ceiling height 3m). In ISO 5, Clinicair 4 can decontaminate efficiently a room of 53 m2 (ceiling height 3m). Clinicair 4 can be installed in technical premises or outside the building. CTMP is a transport chamber which protects the patient or the external environment from any cross contamination that could occur during land or air transport. The chamber can operate in negative or positive pressure mode: Negative pressure: to transport infected patients or patients suspected of biological contaminations such as : viral hemorrhagic fever, SRAS (severe acute respiratory syndrome), smallpox, tuberculosis, meningitis, Ebola, etc. Positive pressure : for protection and transport of immuno-compromised patients : bubble child, aplasia, etc. CTMP provides a stress-free transportation: For medical staff in charge of transport who is protected against any risk of contamination For the ambulance driver who does not need to wear any special protective outfit and to disinfect the vehicle

For hospital reception staff who can safely take care of the patient without any risk of contamination of the premises or other patients and who can easily clean the chamber. Our laminar air flow ceilings ensure an efficient protection against contamination and are dedicated to the operating rooms to achieve a room classification of level ISO 5. They create a clean zone around the patient, the medical staff and the medical devices. Our laminar air flow ceilings are mainly used with our air handling units Clinicair and can also be adapted to any AHU from a different brand. Available in different sizes and shapes to suit any room layout Available in two versions : single or double air flow speed Easy installation and filters replacement Central passage for the surgical light Option : integrated LED lighting Option : integration of Bioxigen system forthe destruction of microorganisms HVAC are used in areas where it is necessary to control the temperature, humidity and filtration.

The range was developed in accordance with quality standard and with certified mechanical properties, in search of lower energy consumption to respect the environment. This range is easily adaptable to different needs: its construction is modular and allows a wide range of sizes and shapes. It is produced in two versions, STANDARD and PLUS with panels of 25mm or 50mm. A hygienic version meets all needs where such employment is required. These plants are easily cleaned and disinfected. They are particularly intended for applications in hospitals, laboratories, food industry and the pharmaceutical industry. They were developed with particular care to reflect the specific needs of these environments. The MRI hydraulic kit is a system of fluid cooler to cool down the MRI scan system with automatic management of a city water back up that enables to maintain the cooling conditions. The MRI hydraulic kit is equipped with: A touch dialogue interface with display of information, alarms reports, mail sending service