EMC Mechanical Services has a large focus on Healthcare and the Medical Industries. We perform service and special project installations at many local and area Medical Facilities and Clinics. One recent project was the renovation of the VCU Health Systems Cath Lab. Cath Labs are very complex procedure rooms that require coordination of multiple systems located in the ceiling, including lighting, air delivery, structural boom mounts, rail structures, power, and medical gas coordination.  All of these systems must be coordinated and installed by multiple trades in a tight space.  The CLEANSUITE® fully-integrated operating room ceiling system is a custom air delivery system that incorporates all of these components into a modular, easily installed package that significantly reduces installation time and risk associated with multiple trades all working simultaneously. CLEANSUITE® is designed to provide laminar air flow over the operating room table, contributing to a significant reduction in the airborne contaminants in the surgical sterile field. 

Its integral aluminum extrusions allow for LED Lighting to be placed throughout the system and directly over the patient to help increase light levels for the Cardiac Team to work efficiently and effectively.  The aluminum extrusions also allow for the required Uni-Strut to be placed in the system per the specifications of General Electric imaging equipment used in the Cath Lab.  how do hvac thermostats workCLEANSUITE also incorporates all of the boom mounting plates and structural components for a seamless installation.ac unit for sliding door Redundancy in an air delivery system is also important to a hospital.  how to duct a window ac unitVCUHS decided to utilize a Temtrol Rapid Knockdown Air Handling Unit with FANWALL TECHNOLOGY® to help keep their procedure rooms online, even in the event of a fan/motor failure. 

With four supply fans on individual VFDs and FANWALL® Optimization Control, the AHU can turn off and on fans to maintain peak efficiency throughout the AHU operating range.  This, along with smaller motor horsepower and fan wheels, provides an air handling system with the best reliability and lowest total cost of ownership. Nortek Air Solutions, the parent company of Huntair and Temtrol, provides custom air handling and air delivery solutions for Healthcare and Operating Procedure Rooms.  Sole source responsibility allows for the project to be delivered on time and in budget. Contact EMC Mechanical Services for more information on how we can help with your future Healthcare Projects.Local area facilities rely on BION's highly specialized staff expertise to tackle their most difficult projects. is the renovation of a four story building that must be completed in four months to allow owner occupancy. working with currently occupied floors. Given the schedule and current

occupants, the project requires both day and night crews working inThe mechanical work includes replacing the majority of the HVAC system to include: 5 Air Handling Units, 280 Fan Coil Units, 2 Chillers and converting the existing pneumatic ATC System to 100% DDC. back frequently for construction updates. Fairfax Hospital South Patient Tower partnership of Shapiro & Duncan and BION has been awarded the mechanical construction work for the new South Patient Tower at FairfaxThe project consists of adding a new 11 story patient tower adjacent to the existing patient tower. In addition to patient rooms, it includes an ultrasound suite, cafe, and the addition of a cooling tower at the power plant. Check back frequently for construction Fair Oaks Hospital Histology Lab/Morgue Renovation project includes phased renovation of interior space for a histology lab, offices, IT space and reconfiguration of the existing morgue. work also includes providing space for a temporary grossing area while

the project is under construction. All work outside the renovation space, including the new chilled water piping serving a new custom air handling unit serving the new lab/morgue space, is beingWe are utilizing copper pipe and the Viega pipe fitting system in order to eliminate the need for brazing or welding in Mount Vernon Hospital Radiology Renovation renovation of existing radiology department and replacement of the Interventional Radiology Imaging System. The work consists of providing HVAC, plumbing and medical gas systems for the new special procedure room, radiology reading room, nurse station, six prep holding bays, and Loudoun Hospital Ambulatory Surgery Center Renovation Care Renovation project including phased renovation of an interior space for a new treatment room, four patient bays, soiled utility, various support spaces and the addition of an operating room grade rooftop air handling system. Fairfax Hospital Patient Tower Renovation

The project consists of infrastructure renovation in an existing building to make ready for a new 11 story adjacent building. part of this project, BION coordinated and successfully completed the placement of an air handling unit utilizing a 550 ton crane. required 17 trucks to transport it to the job site. A crane of such magnitude was required due to the extensive distance that needed to be reached to place the air handling unit safely. involved precise communication between BION and the crane company, GC, VDOT, IFH Safety & Security, the hospital staff and Fairfax Fairfax Hospital Pharmacy Consolidation project consists of the renovation of an existing parking garage at the basement level of the hospital. The renovation includes the enclosure of the open parking structure, construction of the main IFH pharmacy with automated dispensing, pharmacy staff offices along with a clean If you’re seeking a world-class training and technology center, this is IT&T.

State-of-the-art, Customizable Bioskills Lab The heart of the IT&T is its advanced 2,800-square-foot bioskills laboratory containing up to 16 stations that can be customized to meet your unique requirements. The IT&T is designed to meet the needs of medical professionals, health technology manufacturers, pharmaceutical companies, and other organizations that require a state-of-the-art, commercially-neutral learning facility. Ideal for hands-on surgical training, new product education or demonstration, medical association symposia, and other activities that advance medicine and improve patient care, the IT&T functions both as a live and virtual learning environment, with state-of-the-art connections within its walls (connectivity between the Auditorium, meeting rooms and the bioskills lab) and throughout the world. Real-time, two-way broadcast capability via Internet 2 or satellite offers the flexibility to conduct interactive trainings or presentations nationally or internationally.

2 stations with broadcast capability to other stations, the conference center, or throughout the world Modular, highly configurable design 16 fully equipped endoscopic towers 4 high-speed endoscope reprocessors and 1 high-speed washer/disinfector Locker rooms with shower facilities Overall: dedicated 200-amp, 208–120-volt, 3-phase, 42- pole power panel board supports plug and lighting load densities of 21 VA per square foot Per lab station: dedicated overhead service carrier contains 6 20-amp/120-volt NEMA 5 integral receptacles, 4 integral up-lighting fixtures with separate switch for each carrier Accommodates up to 8 C-Arms 16 LED procedure lights Combination of 2x4 recessed cleanguard class fluorescent fixtures and CFL open down lights equipped with dimmable controls Designed to maintain 69° F (adjustable) year-round Dedicated DX rooftop air handling unit; operates in a 100 percent outside-air mode and a minimum ventilation mode